Back
Category: Utilities
uFoscam: 2-way Audio & AV Record

uFoscam: 2-way Audio & AV Record

       Mac OS

uFoscam allows you to remotely monitor up to 9 multiple live video and audio feeds with top notch performance and super easy control for Foscam IP camera.
Unlike the ordinary Foscam applications, uFoscam not only gives the user many more options for operation, but enables to quickly and easily add new models right after user’s request through our open architecture software.

* Main Features
▶ Up to 100 cameras can be configured
▶ Direct access to audio and video streams from cameras. No NVR or 3rd party server is required
▶ 2 Way Audio (Push to Talk)
▶ Recordings can be scheduled to start and stop multiple times on any particular day, or the same time periods can be set for multiple days simultaneously
▶ Export event recordings in the specific time duration to one video clip
▶ Simply playback video from scheduled, event recordings by daily or hourly search
▶ Automatically record videos with audio by in-app noise and motion/face detection
▶ Enable or disable motion/face detection up to 9 cameras (max 4 recommended in dual core CPU)
▶ Easily view multiple feeds simultaneously on a screen with layout controls (1, 4, 8, 9 layouts)
▶ Last layout they were at automatically saved (initial layout is 4)
▶ Live video viewing of up to 9 feeds at a time or full screen
▶ Friendly navigate back and forth between multi cameras screen
▶ Auto sequence monitoring for automatic cameras switching
▶ Auto patrol to preset positions according to the preset number and time interval
▶ Pan and Tilt controls up to 8 directions
▶ Set and go presets up to 8 positions
▶ Control an automated vertical/horizontal patrol
▶ Switch IR-LED illumination for night vision on/off
▶ Adjust brightness and contrast
▶ Toggle mirror and flip mode on/off
▶ Adjust video resolution and light frequency
▶ Set the resolution of video image (if applicable)
▶ Enable or disable Aspect Fit
▶ Quickly and easily add new models with reload button
▶ Clone easily camera settings
▶ Reorder camera lists
▶ Exchange setup file between the Mac devices
▶ Enables setup without username and password for a public camera anywhere in the world
▶ Compatible with Dynamic DNS services
▶ Take snapshots or share via email, Facebook and/or Twitter

* Supported IP Cameras
- Common: Generic
- PanTilt: FI8608W, FI8610W, FI8619, FI8620, FI8901, FI8901W, FI8908, FI8908W, FI8910W, FI8916W, FI8918W, FI8919W, FI9820W, FI9821W, FI9826W, FI9828W, FI9831W
- OutDoor: FI8601, FI8601W, FI8602, FI8602W, FI8903, FI8903W, FI8904, FI8904W, FI8905W, FI8906W, FI9801W, FI9802W, FI9804W, FI9805W
- Other: AJ-C2WA, FI8902, FI8902W, FI8907W, FI8909W, H3-186, H6-M137, JW0008
* For FI8601, FI8602, FI8602W, FI8608W, FI8620W, FI9820W, we support only low resolution video with Pan Tilt (not support audio and other features)
* FI9801W, FI9802W, FI9804W, FI9805W, FI9821W, FI9826W, FI9828W, FI9831W is required to “Switch to MJPEG” with admin account login
* The following branded cameras may be also compatible with uFoscam (not sure for audio)
- Apexis, Clairvoyant, EasyN, EasySE, Eyesight, Hootoo, Novibo, Smart Teck, WatchBot, Winstar
- Refer to detail supported models at www.ubntek.com/ufoscammac

* Note
- Before you can control your camera(s) remotely over data networks, you need to setup your router to allow incoming traffic. For security reasons, routers don't normally allow external traffic into your local network. You should read your camera’s setup manual regarding port forwarding. For more information, please see www.portforward.com or www.dyndns.org
- The quality of video display(s) shown on your device may vary according the quality of the camera(s) and the data received from them.
- Simultaneously continuous capturing videos by maximum motion detection enabled may cause increased video frame and audio delays.

If you have any questions or comments, or you would like to request that we support additional camera models, please send an email to support@ubntek.com

What's new

- Optimized for OS X Mavericks

All reviews and ratings are reset once an update is released. We would greatly appreciate it if you could continue to award us the 5 star ratings/reviews. Thank you for your support!


Screenshots

Screenshot 1 of 5

Share with Others

Last changed:
Jan 14, 2014
Category:
Utilities
Developer:
UBNTEK Co., Ltd.
Version:
1.9
Size:
3.2 MB

Current Version Average Rating:
4.00 (134)

All Versions Average Rating:
3.50 (201)
Other Apps By This Developer
uApexisCam: 2-way Audio & AV Record
uApexisCam: 2way Audio & AV Record
uBabyCam with AV recording
uBabyCam with AV Recording and Audio Graph
uBabyMonitor with Sleep Patterns
uCamPro HD: IP Camera & Webcam Viewer
uCamPro: IP Camera & Webcam Viewer
uContacts: Contact, Group, Message, Mail, Speed Dial
uContactsPro: Speed Dial and Contacts Sync
uFoscam: 2way Audio & AV Record
uLinksysCam
uMobileCam Camera
uMobileCam Monitor
uMobileCam: All-In-One Mobile Surveillance
uNetCams HD: Multicam & Record
uNetCams: Multicam & Record
uNetCams: Multicam Monitor
uPanasonicCam: Audio & Record
uTrendnetCam: Audio & Record
uViewer for AXIS Cameras
uViewer for Axis Cameras
uViewer for D-Link Cameras
uViewer for D-Link Cameras
uVivotekCam
uWanscam: 2way Audio & AV Record
uFoscam: 2-way Audio & AV Record 4.00 out of 5 based on 134 ratings.